Rips in the surface of your pool table can be very frustrating. There can be a small rip and it makes playing on it an interesting challenge. This means that, to not be accused of rigging the game in your favor, the felt should be repaired or replaced. A professional firm can do this pool table refelting and they will make sure it is right.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
Recovering the entire piece will present itself as a necessary step when you find the worn, faded look that may be present after you have had the table for a few years. This is something that can be a do it yourself project if you follow a few simple rules. A conversation with the personnel at a pool table supply house will help you understand what you need to do. Several firms in the Denver, CO area will assist you with this.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
That color green has been done to death. It looks like all other pool tables and you may want something with a little more color or depth to it. You can select many of the blues, purples, reds, cream and even many with images on them as well as designs of various natures. Making your table stand out from the rest will help people remember they would like to come to your next party, and the next.
Watching the professionals go to work on your table will help you understand what they are doing and more about this game piece. The measurements will be exacting as will the dismantling of the rails. Removing the felt and old glue will make the way clear for the new piece. Old staples will also be removed so they do not interfere with a proper installation.
The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.
Rails are then disassembled and covered as well. With weights on the table top and rails reinstalled, a 24 hour curing time will be appropriate. A representative will come back and ensure everything is as it should be. They might even challenge you to a game to make sure.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
Recovering the entire piece will present itself as a necessary step when you find the worn, faded look that may be present after you have had the table for a few years. This is something that can be a do it yourself project if you follow a few simple rules. A conversation with the personnel at a pool table supply house will help you understand what you need to do. Several firms in the Denver, CO area will assist you with this.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
That color green has been done to death. It looks like all other pool tables and you may want something with a little more color or depth to it. You can select many of the blues, purples, reds, cream and even many with images on them as well as designs of various natures. Making your table stand out from the rest will help people remember they would like to come to your next party, and the next.
Watching the professionals go to work on your table will help you understand what they are doing and more about this game piece. The measurements will be exacting as will the dismantling of the rails. Removing the felt and old glue will make the way clear for the new piece. Old staples will also be removed so they do not interfere with a proper installation.
The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.
Rails are then disassembled and covered as well. With weights on the table top and rails reinstalled, a 24 hour curing time will be appropriate. A representative will come back and ensure everything is as it should be. They might even challenge you to a game to make sure.
About the Author:
You can visit www.americanbilliardsservice.com for more helpful information about Pool Table Refelting Is Best Left To The Professionals.
0 comments :
Post a Comment